Ask Experts Questions for FREE Help !
Ask
    STLEWIS's Avatar
    STLEWIS Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jun 8, 2009, 08:28 PM
    Installing Thermostat
    I am installing a thermostat but the wiring does not match up.I have 2 sets of wires, same colors coming from the unit. The colors are red,white,and blue. What goes where
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Jun 9, 2009, 12:44 AM
    Old thermostat brand and model number?
    New thermostat brand and model number?
    Type of equipment being used (gas,oil,or electric or heat pump) and the brand and model for all items.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Installing new thermostat [ 2 Answers ]

I need some info on how to wire from a Hunter 44155c thermostat to a Honeywell RTH110B thermostat.there is nothing showing which wire installation from the old thermostat

Installing new thermostat [ 4 Answers ]

We are trying to install a newer thermostat. The old one has several wires about 8 or 9. the new one only has 4 or 5 terminals. What do I do with all the extra wires. Old wire colors 2 reds, 1 green, light green, blue, white, brown, yellow

Installing a new thermostat [ 3 Answers ]

My old thermostat is a Carrier and says "Heat Pump System Control" it does not have a model # and is probably 20 years old. I have a new thermostat which is a LUX TX9000. I removed the old thermostat and there are eight wires all of which are connected They are as follows: w2 - Brown ...

Installing a thermostat? [ 2 Answers ]

Hello, I'm trying to install a thermostat for a heat convector... There are three wires entering the box. 1 is from the power sourse, the 2nd goes to a plug and the third wire, I imagine goes to the heat convector. How do I connect to my new honeywell, two wire connection thermostat? Do I...

Installing a two wir thermostat [ 2 Answers ]

I am tryig to install a two wire thermostat in a mobile home. The wires are not marked. It is a manual 24 volt thermostat with markings G,Y,W,RH,B,O,RC with RH and RC already connected. It is a red and white wire going to the blower that connect red to red and white to green. Please HELP!:confused:

View more questions Search