Ask Experts Questions for FREE Help !
Ask
    jroboliv3r's Avatar
    jroboliv3r Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Aug 23, 2014, 12:26 PM
    Kenmore Elite HE3T Washer
    The machine goes through all the cycles on normal wash until it gets to the final spin cycle with 11 minutes left, and it doesn't continue progress or shut off, and there is no error code. Why will it go through the first spin cycle and then stop on the last?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kenmore elite washer he3t troubleshooting? [ 1 Answers ]

My washer never goes into the higher speeds for spin mode, so clothes remain soaked. No error codes.

I keep getting f9 code on my kenmore elite HE3T washer. [ 0 Answers ]

My kenmore elite he3t front load washer will not start [ 0 Answers ]

My Kenmore elite He3t front load washer either won't turn on or if the LED panel lights up, the washer will not start once the start button is pushed and held. I have unplugged it repeatedly for 30 minutes at a times without solving the problem. HELP!

My kenmore washer elite he3t has a f5 code what's wrong [ 0 Answers ]

I have a kenmore HE3t washer. At the beginning of the wash it runs for about 2 minutes then stops and flashes f5 . What's wrong?

Kenmore Elite HE3t Washer 42922 [ 1 Answers ]

Washer doesn't finish cycle. Stops at rinse and keeps beeping. When paused and started again, rinses for another minute and stops again to keep beeping. While beeping, it flashes minutes left on cycle then an "F" continuously.

View more questions Search