 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Can't adjust top rack in Kenmore Ultra Wash 665 dishwasher
If I raise the upper rack in my Kenmore Ultra Wash 665 dishwasher, the washer arm at the bottom of the rack no longer connects to the water supply at the rear of the dishwasher.
Am I missing a part? Thanks, |
||||
|
||||
|
You may be missing something. Here is the manual: https://dl.dropboxusercontent.com/u/...Dishwasher.pdf
|
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
The "Lock On" light is suddenly flashing. Tried to "cancel" & the dishwasher goes into drain cycle. Light goes off & then comes back on. Is this a mechanical problem associated with the door switch or a code Re-set? Thanks.
Red lock light flashing. Have tried everything I have read on line to fix to no aveal nothing works. HELP
Kenmore Ultra Wash Model 665-1637. The noise is loud like the machine is overworking and will run for hours to complete a cycle. The top rack does not get clean. Is this a faulty impeller and worn bearing?
Bottom rack has folding tines. Gray plastic clip (W10175278GN) that holds folding tines in upright position falls off when you slide the rack in and out to load/unload. Clip appears to hit the water inlet opening on the left inside wall. Is there a redesigned clip to replace the original or another...
View more questions Search
|
