 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Kenmore Ultra Wash 665 dishwasher.
The "Lock On" light is suddenly flashing. Tried to "cancel" & the dishwasher goes into drain cycle. Light goes off & then comes back on. Is this a mechanical problem associated with the door switch or a code Re-set? Thanks.
|
||||
|
||||
|
Look at this: https://dl.dropboxusercontent.com/u/...Dishwasher.pdf
It sounds like you need to adjust and tighten the door switch then re-check with your meter. |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
Red lock light flashing. Have tried everything I have read on line to fix to no aveal nothing works. HELP
The dishwasher will not turn on. I've checked the Bi-metal fuse and its OK. I've checked the power to the control board and its 120V. Check continuity on the door switch and its fine. So when I shut the door in a few moments the green wash lite comes on with the pump and it appears to be...
I have a Kenmore Ultra Wash dishwasher that skips the washing phase of all cycles. It also won't allow you to select the "smart cycle" option... any suggestions?
Kenmore Ultra Wash Dishwasher 665.17829 had pots and pans light blinking. What is the reset code for this series. I have answers for 1700 series but does not refer to buttons I have.
The "Quick Rinse" light is flashing and no other buttons work. I've read the reset answers given for other models, but not for my model. I do not have a "Heat Dry" button. Does anyone know the reset code for this model?
View more questions Search
|
