 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
This took me exactly 3 seconds to find: http://www.greenheck.com/media/pdf/m...nstall_iom.pdf
If you need more than this you should not be doing this install! |
||||
|
||||
|
Ah...Stan, I was headed in another direction...
If you're not sure how to install this, you likely have not taken out a permit or are qualified as a fire alarm installer or electrical contractor. If so, doing this in a location where the public may have access puts the premises owner and unqualified installer in a legally questionable position... This was my curiosity... |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
How do I wire a four wire electric furnace to a five wire heat pump with a RTH7600 series Honeywell thermostat?
Where low voltage wire from sequencer plugs into heating element gets hot and melts the wire. What causes this? I changed the wire out, but it does it again.
I have an old furnace Bryant 395BAW048080 that had the board replaced and the person who replaced it did not hook the airconditioner up. My air conditioner has only 2 wires red and white. I want to know how to hook it up. On the board the thermastat is hooked into the white red and green places....
I have a 1961 Gaffers and Sattler furnace, model #90 FEF. The gas valve was not hooked up when we bought the home. The gas company was called and I was told that the gas valve needed to be replaced. I replaced it with a Robertshaw 7000 ERLC gas Valve. I also replaced the transformer. It has a 24V...
View more questions Search
|
