Ask Experts Questions for FREE Help !
Ask
    barryrepair's Avatar
    barryrepair Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Aug 11, 2014, 10:58 AM
    Find replacement bladder for Flotec FP7125-08, #U20-10
    I can not find a replacement bladder other than manufacture, very expensive. Any ideas?
    talaniman's Avatar
    talaniman Posts: 54,325, Reputation: 10855
    Expert
    		  
    #2

    Aug 16, 2014, 10:25 AM
    Sta-Rite U20-10 Tank Bladder

    Flotec, Simer and Sta-Rite parts are interchangeable. The Brand name does not matter, only the part number must be the same.
    jlisenbe's Avatar
    jlisenbe Posts: 5,020, Reputation: 157
    Uber Member
    		  
    #3

    Aug 16, 2014, 11:46 AM
    Have you tried looking here? FP7125-08

    A little more info

    For parts or assistance, call Flotec Customer Service at 1-800-365-6832.

    "P.O. Box 342, Delavan, WI 53115Phone: 1-800-365-6832
    Fax: 1-800-526-3757
    E-Mail: [email protected]
    Web Site: Flotec | Home Water Management Products | Residential Sump Pumps, Well Pumps and Pressure Tanks
    jlisenbe's Avatar
    jlisenbe Posts: 5,020, Reputation: 157
    Uber Member
    		  
    #4

    Aug 16, 2014, 12:23 PM
    Whoops. Sorry. Just noticed this part of your post: "other than manufacture".
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Flotec tank [ 1 Answers ]

Why does my gauge on the tank go from 55 down to 35 then back up.again when ever I run my water?

DIY Replacing Bladder In Flotec FP7110T-04 Pressure Tank [ 16 Answers ]

Does anyone have any tips or additional instructions? We're replacing the bladder in our Flotec FP7110T-04 42 gal. water pressure tank. We have the new bladder, expensive !@#$%^&*! That it is. No instructions came with it. The old one ruptured. Water came out the air valve. The plan is to: shut...

How do I fit this bladder into that little hole on my fp7125-04 tank? [ 2 Answers ]

How do you put that bladder onto that little hole on my fp7125-04 tank?

I have installed a new Flotec Bladder Tank [ 1 Answers ]

I installed a new Flotec Bladder Tank. Luckly no leaks. I have set the tank to the specs of the pump... 20/40 (2 below) on... it ran great for a few minutes. thinking it was builing up pressure... But there is no water pressure. What am I missing? Help!

Bladder Tank Replacement [ 2 Answers ]

I need to replace my 86 gallon bladder tank. Can I replace it with a larger size, any benefits from doing so? I live in a two-story house, and there is one bathroom downstairs that has always had low pressure. I will install it myself. Do you have a recommendation for a supplier and also a...

View more questions Search