 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Hotpoint 40 gal gas water heater leak
I have a Hotpoint water heater, model number HG40T01AVG02. We have had the unit about 5 years now with no problems until today. There is water leaking from the top of the unit out of the top cover, leaking down the sides. What could be the problem?
|
||||
|
||||
|
Make sure water is not coming out the dielectric nipples first. Then you will need to get a flashlight and start looking around for a leak. Also make sure the supply pipe and valve are not leaking. 5 years is not that long, what is the warranty time period?
|
||||
|
||||
|
Hi Preston
Yeah, like Ma0641 said, look for the obvious stuff, for sure, but my guess is that the water heater is defective and will need to be replaced. In most states, these water heaters are sold by Lowe's, so I would contact them and be sure to have the SERIAL number ready as that is how they can tell you if the unit is under warranty or not. I believe the unit you have there only has a 3 year tank warranty from the date of purchase, so it looks like you are out of luck in the warranty department, but please double check just in case I am mistaken, OK? Mark |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
I have a 30 gallon Hotpoint gas water heater with a closed combustion chamber... After removing the burner assembly and reinstalling it I found that the combustion air inlet poppet valve closed. What is the procedure to reinstall the burner assembly to where the poppet valve is open...
After lighting the pilot, and turning the knob to the on position BEFORE setting the thermostat' dial? Itwill not stays on. I have Hotpoint water heater model# HG40T01AVG02
I followed the instructions pushed pilot button down and pudhed igniter several times but it won't take off, I've done this so many times the igniter doesn't even flash any more
I own hair salon and have been having problems with not enough hot water. I had the system checked for leaks. I upgraded from a 30 amp breaker to a 40 amp and i bought a new 80 gal. hot water heater. I still run out of hot water in a few hours. There is no way i'm using that much hot water. Help!!
We have a Whirlpool hot water heater (in stand alone closet). We started having problems with the pilot staying lit, so I called the company (it is under warranty for 1 more month). The told me there was a defect in our model, so they sent me to Lowe's to get a free part (thermocouple). I relaced...
View more questions Search
|
