Ask Experts Questions for FREE Help !
Ask
    DarlaLowell's Avatar
    DarlaLowell Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Aug 6, 2014, 06:06 PM
    Where is the switch in my Kenmore 110 washer that turns on the hot water?
    Kenmore 110 was just repaired. After serviceman left there was only cold water
    Where is the switch in the back to turn on hot water?
    DarlaLowell's Avatar
    DarlaLowell Posts: 2, Reputation: 1
    New Member
    		  
    #2

    Aug 6, 2014, 06:10 PM
    Question about 110 kenmore washer no hot water
    Serviceman left my 110 Kenmore washer with only cold water. How can I fix that?
    drtom4444's Avatar
    drtom4444 Posts: 3,282, Reputation: 145
    Ultra Member
    		  
    #3

    Aug 7, 2014, 11:48 AM
    There is a faucet that supplies the hot water just like the cold water supply. You could have a stopped up screen where the hose connects to the machine. There are screens on each side that filter the water before it goes to the water valves. If something is wrong with the water temperature selector then you will have to replace it after you test it with a meter.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

No hot water in Kenmore 70 Series washer [ 3 Answers ]

I just replaced the hot/cold water valve in my Kenmore 70 Series Heavy Duty Plus washer model no. 82372110. I had one wire in the wiring harness, small, left over and couldn't find where to attach it. The washer fills fine with cold water but takes in no hor water. All lines and hoses are new...

Kenmore uto Washer, Model 110-24632300 filled with water and that's it. [ 1 Answers ]

About the third load of the day and the washer filled with water and will not do anything else. Power supply is good. I have emptied the clothes and drained the machine. Hoping someone can help me with where to go next.

Kenmore Elite Washer 110.23032102 sometimes won't spin/drain water [ 2 Answers ]

Hello, I have a Kenmore Elite washer model 110.23032102 that, most of the time, does not spin when it gets to the rinse cycle. When it does spin on it's own (sometimes I can get it to spin by playing with the control know and moving it to the next spin cycle) it does not always spin enough to...

Kenmore Washer 110.92588210 cold water won't shut off [ 2 Answers ]

Cold water won't shut off, even when the washer is off.

Kenmore washer dryer combo 110-92966-102,washer agitates for a little then it stops. [ 0 Answers ]

Kenmore washer dryer combo 110-92966-102, The washer will fill and it will agitate for a little bit for about a minute, then it will stop before finishing.When it stops there is no motor sound.No matter what I set the knob to it will not start up again,but if I wait several minutes it will...

View more questions Search