Lx279 pto will not engage

dlh2217 Posts: 1, Reputation: 1

New Member

Jul 23, 2014, 08:52 AM

Lx279 pto will not engage

Ref: lx279. Ran good about 2 weeks ago and shut down normally. Pto wasa working. Tried to start today and PTO won't engage. What could be the problem?

Check out some similar questions!

John Deere LX172 PTO won't engage [ 15 Answers ]

I have a John Deere model LX172 riding mower. It runs well but I can't get the mower to engage. The main pulley under the motor will not turn. The engine will kill if I turn on the PTO switch while not in the seat so I'm assuming the switch and the safety part of it works. Any suggestions on what...

Gt262 JD will not run in gear or when you engage pto--why? [ 0 Answers ]

GT 262 will not run if the PTO switch is engaged or if you put in gear or under a load... it may run for a short distance but will stall. This happened all at once... 3 weeks ago last used no problem.

John deere pto won't engage? [ 2 Answers ]

I have a john deere 300, the pto unit was working just fine and it just suddenly quit, I checked wires and everything appears to be connected, the engine runs but the pto just won't engage there are no repair shops close to me at all any thing I can took at and try>

Troy-bilt PTO blade engage [ 3 Answers ]

I have a Troy-bilt hydrostate, 46"cut 3 blade lawn tractore w/ a PTO blade engagement. Was cutting and the blades stopped. Everything else works fine and there is nothing hanging or loose that I can see. What do I need to look at before I take it to a shop for repair?

View more questions Search

Check out some similar questions!

Add your answer here.