Ask Experts Questions for FREE Help !
Ask
    tcsuperior's Avatar
    tcsuperior Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Apr 16, 2011, 02:06 PM
    Troy-bilt PTO blade engage
    I have a Troy-bilt hydrostate, 46"cut 3 blade lawn tractore w/ a PTO blade engagement. Was cutting and the blades stopped. Everything else works fine and there is nothing hanging or loose that I can see. What do I need to look at before I take it to a shop for repair?
    DG's Avatar
    DG Posts: 1,375, Reputation: 109
    Ultra Member
    		  
    #2

    Apr 16, 2011, 03:40 PM

    There's
    tcsuperior's Avatar
    tcsuperior Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Apr 16, 2011, 05:45 PM
    It is an electronic PTO pull-on switch like an old headlight switch. No Lever
    DG's Avatar
    DG Posts: 1,375, Reputation: 109
    Ultra Member
    		  
    #4

    Apr 16, 2011, 10:09 PM

    Check the pto switch with key on not running sitting on seat , pull the switch if no click. Check for power at the plug going to pto clutch,if power there replace clutch.
    Luck
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Troy Bilt electric pto [ 6 Answers ]

Hi, first time I have posted hope I do it right. I have a 22 hp Troy Bilt garden tractor with an electric pto. My problem is the pto keeps shutting down, sometime I can go for a while other times it will kick out repeatedly. I have tried wiggling the switch and that doesn't seem to matter, also...

Troy-Bilt PTO [ 1 Answers ]

My pto will not engage how do I check if relay or switch is bad? I checked at the plug for the clutch and I am not getting power. Troy-Bilt lawn tractor.

Troy-Bilt PTO [ 1 Answers ]

My pto will not engage how do I check if relay or switch is bad? I checked at the plug for the clutch and I am not getting power.

View more questions Search