Ask Experts Questions for FREE Help !
Ask
    ebalbe's Avatar
    ebalbe Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jul 17, 2014, 08:30 AM
    Display shows short with no valves connected
    I have a Hardie Controller (Part # 675401). It has 15 stations. The LCD goes from "On", to "Off", to "Short". I disconnected all the wires to the valve stations including the common. The display still shows the same sequence for most stations. Is the electronic board defective or is the cable between the board and the display panel in the door defective.
    smoothy's Avatar
    smoothy Posts: 25,490, Reputation: 2853
    Uber Member
    		  
    #2

    Jul 17, 2014, 08:39 AM
    Just to eliminate the obvious first... is the cable correctly plugged in? Some devicesd its impossible to plug one in incorrectly... others it takes a real effort to make sure its done right. No bent pins or anyhting like a strand of wire that shouldn't be there?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

EER shows on the display [ 2 Answers ]

T-stat regularly displays EER, am I in trouble?. No manual available as we are the second or third owners..

Laptop is connected but won't display webpages [ 2 Answers ]

I am using a sky wireless router and it says it is connected but if I try to go on a page it says page cannot be displayed is there anything I can do to make it work?

Display only shows large icons. [ 5 Answers ]

I have an IBM ThinkPad 390X laptop with Windows Millennium that will only start up with large icons. (During startup, after the "Windows Me" logo screen appears and disappears, on a blank screen with a blinking cursor in the upper left, it always gives a two part beep ("beBOOP") before the desktop...

View more questions Search