Ask Experts Questions for FREE Help !
Ask
    sjhangtown's Avatar
    sjhangtown Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jul 5, 2014, 10:13 PM
    200 amp service disconnect with breakers for well
    Does anyone make a service disconnect for 200 amps with double lugs, so you can feed two sub panels from the same main box?
    donf's Avatar
    donf Posts: 5,679, Reputation: 582
    Printers & Electronics Expert
    		  
    #2

    Jul 11, 2014, 07:10 AM
    Not that I know of, however there is a 300 amp meter base that allows for the connection of two panelboards.
    stanfortyman's Avatar
    stanfortyman Posts: 5,598, Reputation: 279
    Electrical & Lighting Expert
    		  
    #3

    Jul 12, 2014, 04:41 AM
    You can use a 200a feed-thru meter-main. This is one enclosure with a meter, main breaker and usually 6-8 additional breaker spaces, and 200A feed-thru lugs out the bottom.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Need to upgrade 200 Amp Outside Service Disconnect [ 10 Answers ]

I'm buying a house. The inspector says I need to upgrade the 100 Amp Outside Service Disconnect to 200 Amps. It is a breaker and he says if I don't upgrade it I will probably have it flip on me frequently because the control station inside is a commercial 200 Amp unit. My question is this. Do I...

200 amp service disconnect to150 amp max panel? [ 2 Answers ]

There are two 200 amp service disconnects feeding two Challenger 150 amp service panels. Can you do this?

Upgrading to a 200 amp service entrance and disconnect [ 0 Answers ]

I currently have a 150 amp service and I am adding a new attached garage. I plan to install a new 200 amp exterior breaker/disconnect with meter. My existing 150 amp panel is some 30 ft from the meter and is fed by a 2/0 AL cable. I plan to install a 50 or 60 amp sub panel in the new garage...

200 amp service disconnect [ 1 Answers ]

What type of 200 amp service disconnect ( type 3 ) is better, a fused type or breaker type? Are they both available with a knife switch type handle?

200 Amp Outside Service Disconnect [ 5 Answers ]

I NEED TO KNOW IF A "200 AMP OUTSIDE SERVICE DISCONNECT" IS THE SAME THING AS A "200 AMP OUTSIDE MAIN BREAKER OR LOAD CENTER"? SOMEONE PLEASE HELP ME!! HOME DEPOT WAS USELESS.:confused:

View more questions Search