Ask Experts Questions for FREE Help !
Ask
    mcleeg's Avatar
    mcleeg Posts: 1, Reputation: 1
    New Member
     
    #1

    Jul 9, 2014, 02:05 PM
    My AC stopped cooling condenser, fan, working, what can be wrong,what can ido to fix
    My 2010 comfortmaker air conditioner stopped cooling. Checked the compressor, fan, house circuit breakers, all working and clean. The copper tubing coming from the compressor are not cold. Does anyone have any suggestions on what may be wrong and what I can do it to fix it? Does it need a shot of freon and can I do that myself and how. Need Help its HOT
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
     
    #2

    Jul 9, 2014, 02:37 PM
    The copper line FROM the compressor should be hot, that is the pressure side. No you cannot install your own Freon unless you have a supply. HVAC supplied will not see it to you. How did you test compressor? Is it running? Is the air handler running? Coil frozen?
    Studs ad's Avatar
    Studs ad Posts: 134, Reputation: 9
    Junior Member
     
    #3

    Jul 9, 2014, 07:41 PM
    I haven't personally tried to buy the new R410A refrigerant, but some of my buddies in the business talk like it isn't restricted like the R22 Freon was. None the less, you probably have a leak in your system that a technician needs to look at. The new systems run at a much higher pressure than the old ones did and so leaks can be more common. If you try to charge yourself you might run into a situation where the incorrect charge can build higher than rated head pressures and destroy part of your system. Leave it up to the guys who know what they are doing!

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

My Rheem central a/c stop cooling outside compressor fan stopped working [ 1 Answers ]

Central a/c 8 years old Rheem classic stopped cooling only warm air out of registers. Fan on outside condenser stopped also. What could be the problem. Thanks, MJS

The blower fan stopped working on my RUUD Cooling / Heating System [ 1 Answers ]

While attempting to raise the temp higher the fan stopped working. I changed the thermostat from a mercury to honeywell digital but to no avail.

Condenser fan stopped running [ 2 Answers ]

I have a miller condenser unit, and it stopped running. I hear everything else trying to run, the coils are getting super hot after 2-3 minutes, and the fan will not start running. What could be wrong?

AC not cooling (condenser fan not turning) [ 16 Answers ]

Hello everyone, A few days ago, my AC went out; no heat, no air and no fan. I have a Goodman furnace and compressor. I checked the t-stat wires and there was no power. I replaced my t-stat (taking care to re-wire properly) and still nothing. I traced the power across the entire system,...

Outside condenser (heatpump) not working in cooling mode [ 2 Answers ]

My Goodman heatpump consonsor will not start in cooling mode. I have 240 volt and 24 volt at the condenser, but the unit still won't turn on when I call for cooling. The unit has a defrost circuit board. Need help. Thanks


View more questions Search