Ask Experts Questions for FREE Help !
Ask
    balmrb's Avatar
    balmrb Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Apr 21, 2012, 10:22 AM
    Intelectron BC8700K motion light
    I've installed my Intelectron BC8700K motion light inside my garage. Set the time and range with the test switch. When switched out of test the light goes on and stays on day and night. Wiring has been checked and Blk to Blk and Wht to Wht. All seems to be in order. Replaced the Intelectron BC8700K motion light with a second one and the same thing happens. Any ideas on the problem?

    Thanks,
    AMB
    jnmandel12's Avatar
    jnmandel12 Posts: 1, Reputation: 1
    New Member
    		  
    #2

    Jul 9, 2014, 09:38 AM
    I just installed the same light, with the same problem.
    Has anyone contacted the manufacturer?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Intelectron BC8200R motion detector stays on all of the time [ 2 Answers ]

I have an Intelectron BC8200R motion detector in my backyard. Lately it stays on all of the time. I tried turning it off at the switch and at the breaker, but it doesn't change anything. I inherited this when I bought my house, so I don't have a manual and can't find one online. ...

Intelectron bc915 series carriage lantern with motion detector [ 2 Answers ]

How do I adjust range

Motion sensing light powered off, on, and motion [ 4 Answers ]

How can I wire a motion sensing outdoor light to be either switched on, off, or motion detected on.

Intelectron motion detector manual [ 2 Answers ]

Intelectron Motion Detector Light model BC8300/BC8310. Manual overide does not come on At wall switch. Per the manual I have the overide switch in the "OFF" position. Can anyone Help me?

Intelectron motion detecting Light Goes On In The Day [ 2 Answers ]

Intelectron motion detecting Light Goes On In The Day, stays on for 1 min as per the setting. The light sensor on the bottom is not covered

View more questions Search