Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
I am installing a standard ceiling light where a wall controlled ceiling fan had been
[ 2 Answers ]
The ceiling box had a black wire, a white wire, a red wire, & a bare ground wire. I connected the black to black, white to white, ground to the ground on the fixture strap, & ignored the red wire. The light now works but not with the flip switch. It works with the round switch when it is turned to...
Install Wall controller for ceiling fan with light originally that came with remote
[ 4 Answers ]
I have a ceiling fan with light. My remote control recently blew up and I'm wondering whether I can install a wall controller instead? The current wall switch is a standard one with 3 wires - I'm assuming Earth, Hot, and Neutral. The wires coming out of the ceiling also has the same 3 wires.
Ceiling fan install, with two wall switches
[ 2 Answers ]
I've installed a ceiling fan in a hall location where there were two lights, placed the fan and light combo at one of the existing locations. But there are two independent light switches now I can't use the fan and or lights sepertly, I have light and fan on or off and not independent
Ceiling light install from a wall plug that is on/off switch
[ 9 Answers ]
I have a bedroom wall plug. There is switch that turns power off & on , on the lower plug. I want to be able to set the switch up to turn a new ceiling light on & off and just have the wall plug with permanent hydro. What is the best way to set this up.
Ceiling light using existing wall switch that currently controls a wall outlet plug?
[ 2 Answers ]
I have a bedroom wall outlet plug that is currently switched on/off by an existing wall swtich. I want to set up that switch to turn a new ceiling light on/off and leave the wall plug controlled also by the wall switch. Is this possible and safe to have the existing wall switch control both the... View more questions Search
|