Ask Experts Questions for FREE Help !
Ask
    cmercer25's Avatar
    cmercer25 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jul 9, 2014, 08:33 AM
    I have a clare gas furnace which won't start up.
    I have a clare gas furnace which won't start up. The blower doesn't work either. What could be causing the problem?
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #2

    Jul 9, 2014, 03:02 PM
    Lots of things. Bad thermostat, loose wire, bad component in the system, no gas, no power etc. Need to start checking.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Heil gas furnace--replace air pressure switch but won't start [ 0 Answers ]

Model NTGM075EGA3 Heil gas furnace I replaced the air pressure switch per serviceman advice but am not sure if the furnace is supposed to automatically startup ? It didn't. How do I know if it has a pilot light? I see no pilot button to push. This furnace is about 12years old. If it has a hot...

Gas furnace blower motor won't start/slow to start [ 0 Answers ]

I have a airtemp probably 70's model we had to replace the blower motor about two years ago. Now when the fan is supposed to start it either won't start or is very slow to start. When this happens you can manually move the squirrel cage and it runs great through the complete cycle. We just replaced...

New Gas Goodman furnace won't start! [ 1 Answers ]

I have this problem with a brand new gas furnace, it was installed a few days ago. The heater won't work and the ac blower shuts off immediately when in ac mode. I believe the wiring is OK. The gas won't click and nothing happens when you try to start the heater from the thermostat. I bridged W &...

Why does my gas-furnace not run? (fan-blower won't start) [ 4 Answers ]

Hi Why does my gas-furnace not run? (fan-blower won't start) I could not see any blown fuses or circuit-breakers; power-switch is on; I ignited the pilot-light and turned the temp to 90 in thermostat - but fan-blower did not start at all, even after waiting for 10 min; I measured voltage at fan...

View more questions Search