Ask Experts Questions for FREE Help !
Ask
    Brettbanks's Avatar
    Brettbanks Posts: 1, Reputation: 1
    New Member
     
    #1

    Jul 5, 2014, 06:18 AM
    Murray riding lawn mower
    When I go to push the forward on my mower it will not move but if I lift the rear end off the ground then push the pedal it turns both wheels no problem any ideals
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
     
    #2

    Jul 5, 2014, 04:51 PM
    Hi,
    Have a flat tire, fixed it and lost/misplaced the key? Look at the axle inside the wheel with on the ground; if axle spins and wheel sits still, key is missing.
    Peace,
    Clarke

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Ask about murray riding lawn mower [ 0 Answers ]

I have a murray select model number 425001x8 that won't start up.it a riding lawn mower

Murray 12.5 Riding Lawn Mower [ 1 Answers ]

I need to replace the belt on the lawn mower but the model number is partially missing. This is a 38" cut and an older moldel probably early 90's. How do I find out what belt I need. Any suggestions

Murray Riding Lawn Mower will not start [ 9 Answers ]

I have a Murray Riding Mower that has a problem in the electrical starter control system. The starter does not turn. I have replaced the solenoid and the problem remains. I have used jumpers to bypass all the safety switched one at a time and also bypassed all of them with no change in the...

Murray Riding Lawn Mower [ 2 Answers ]

Hi Guys.. When I crank my mower... it turns over but will not actually crank. I should start by saying that I did a "no-no". I had a weak battery and several times used my car to start (jump off) the lawn mower.. Since then I have gotten a new battery, but now it won't crank. I noticed smoke...

Wires on murray riding lawn mower. [ 3 Answers ]

My dog pulled wires loose on our mower. I don't have the instruction booklet to put them back correctly. Please help!


View more questions Search