Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
How do I add another switch and fixture to a switched light circuit
[ 1 Answers ]
I have a kitchen light that is currently on a single-pole switch, with power entering at the switch and two-wire w/ground Romex going to the light. Can I safely add another switch and, using the existing cable in the wall and ceiling, power another separately-switched fixture? If so, can someone...
Changing a light fixture that is old
[ 3 Answers ]
Trying to replace an old light fixture was never like this. When I took down the old light it had 3 bulbs. The new one has 2 bulbs. The biggest problem that I cannot understand is there were 2 black wires rolled together, 2 white wires rolled together and 1 RED wire? They were capped off. So I...
Hamton Bay outdoor light fixture... how to replace a dead light bulb.
[ 0 Answers ]
I have to see if one of the glass panels slides up or down or left and right. It does not appear that the top or bottom is removable. Don't have instruction guide... don't know the model number
Outdoor wiring of switched plug and constant power to motion light
[ 1 Answers ]
I need a wiring diagram to control a switched receptacle and a motion light. The power to the motion light must be constant. The power to the receptacle switched. Any help would be appreciated.
Outdoor light fixture
[ 5 Answers ]
I want to frost the glass on an outdoor light fixture that is mounted on the wall of my porch. The glass is clear and you can see the light bulb. I am hoping to camouflage the light bulb during the day and thought frosting the glass would help. Unsure what product to use that harsh sunlight will... View more questions Search
|