Ask Experts Questions for FREE Help !
Ask
    secret22's Avatar
    secret22 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jun 24, 2014, 08:32 AM
    How do you remove valve on american standard reliant 1495 series
    Do you need a special tool to take out valve on american standard reliant 1495 series shower
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
    		  
    #2

    Jun 24, 2014, 12:07 PM
    You don't need any special tools to remove a shower valve. However, how you will remove it will depend on the material. The pipes are made of. Plastic will differ from galvanized and Copper will differ from both.
    Remove the knob and a cover plate and let me know what is behind there. Back to you, Tom
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

How do I remove cartridge from American Standard Reliant 1495 [ 1 Answers ]

American Standard Shower Valve [ 10 Answers ]

I have a single lever (actually a rotating knob) American Standard valve. It's stuck so that it doesn't allow any hot water (cold is fine) to pass. Last time this happened (that was about a year ago -- this particlar shower doesn't get used much), the plumber removed the face plate, took out a...

American Standard shower valve leaking [ 1 Answers ]

Replaced Amer Std "ultramix+ bath and shower cartridge" (051337-0070A.) Had lubed washers, reassembled with care & still leaking about 5-6 gallon per day, same as before, more drips when water is turned on and off in same plumbing run. THANKS!

American standard shower valve [ 1 Answers ]

Hi, I installed a american standard shower valve in my shower and I hooked up the hot and cold supply lines backwards. Is there and easy fix to this I really don't want to cut a hole in the back of my wall to fix this. Thanks Stancy

American standard shower valve [ 2 Answers ]

I Have an old American Standard one handle shower only valve (approx 40 yrs old). I bought a repair kit from a plumbing parts store consisting of valve seats, o-rings compresto install the repair kit?sion springs, etc. Can I gain access to the valve from the shower, or do I have to cut a hole in...

View more questions Search