Ask Experts Questions for FREE Help !
Ask
    duckieboyrb's Avatar
    duckieboyrb Posts: 1, Reputation: 1
    New Member
    		  
    #1

    May 29, 2014, 04:49 PM
    I need to locate sensor on a 2006 nissan frontier 4 cyl
    I have had the code checked for my frontier. It says the camshaft sensor is malfunctioning
    TxGreaseMonkey's Avatar
    TxGreaseMonkey Posts: 16,761, Reputation: 5597
    Uber Member
    		  
    #2

    May 29, 2014, 05:09 PM
    It should be right on the end of the cylinder head, secured by a 10mm bolt. It's common for the Camshaft Sensor to fail on Nissans. Use a code reader to clear the code, if necessary.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Nissan Frontier crankshaft position sensor replacement? [ 8 Answers ]

Hello All, First time here, hope someone can help me, and I look forward to assisting others in the future. I have a 2000 Nissan Frontier with a 3.3L V-6, automatic transmission. Recently, it has a problem. The truck starts fine, idles and runs OK for the first 10 minutes, but after that it...

2006 Nissan Frontier Misfire [ 2 Answers ]

My 06 Frontier 4.0 V6, feels like it has a misfire at low RPM's between 40 and 50 MPH. This is the only time it happens. I've replaced plugs and wires. It hasn't gotten any better or worse. What else could this be

Crank angle sensor location on a 2001 nissan frontier v6 4x4 supercharger? [ 0 Answers ]

Computer code says there is a faulty crank angle sensor... trying to locate and replace.

Will a 02-04 Nissan Xterra hood bolt right on a 2000 Nissan Frontier with no mods? [ 0 Answers ]

I've seen it done before online and in magazines. As far as I can tell comparing the two side by side; everything looks identical except the headlight cutouts which I intend to fill. I think it would add a bold custom look. Just wondering. Thanks for your time!

2000 Nissan Frontier (V6 3.3L) with Knocking Sensor Code Displayed [ 3 Answers ]

We have had a knocking sensor code triggered on our Frontier on Bank 1 Sensor 1 and Bank 2 Sensor 1. We replaced all 4 oxygen sensors (Bank 1 Sensor 1, Bank 2 Sensor 1, Bank 1 Sensor 2 and Bank 2 Sensor 2) and the knocking sensor code has been triggered once again. I have put in Denso sensors and...

View more questions Search