Check out some similar questions!
Nissan Frontier crankshaft position sensor replacement?
[ 8 Answers ]
Hello All, First time here, hope someone can help me, and I look forward to assisting others in the future. I have a 2000 Nissan Frontier with a 3.3L V-6, automatic transmission. Recently, it has a problem. The truck starts fine, idles and runs OK for the first 10 minutes, but after that it...
2001 Nissan Frontier Overheating
[ 6 Answers ]
My truck was overheating about six months ago. I ended up replacing the water pump, thermostat and radiator. Well it worked. The other day I was driving and the bottom hose coming from the radiator popped off causing it to overheat. I towed it home and put it back on filled it with water and...
2000 Nissan Frontier (V6 3.3L) with Knocking Sensor Code Displayed
[ 3 Answers ]
We have had a knocking sensor code triggered on our Frontier on Bank 1 Sensor 1 and Bank 2 Sensor 1. We replaced all 4 oxygen sensors (Bank 1 Sensor 1, Bank 2 Sensor 1, Bank 1 Sensor 2 and Bank 2 Sensor 2) and the knocking sensor code has been triggered once again. I have put in Denso sensors and...
2001 Nissan Frontier ac works sporadically
[ 2 Answers ]
I bought a 2001 Frontier 3.3 auto. Problem is the ac only works sporadically. It works more often than not. But sometimes I can park it then come back 5 to 30 min later and it doesn't blow cold. I turn off the switch and leave it off for a few minutes then it may or may not work again. Drive it...
1989 honda civic. (code 4)crank angle sensor.(code 8) tdc position sensor
[ 0 Answers ]
The car idles randomly after warm up.I check the ecu for codes and it gives 4 crank angle sensor and 8 tdc position sensor. I did a search and one of the ad posted by a guy in Canada says that he had to get part from different vehicles until he got all of them to work properly. Will I be able to... View more questions Search
Add your answer here.
|