Ask Experts Questions for FREE Help !
Ask
    superplex69's Avatar
    superplex69 Posts: 2, Reputation: 1
    New Member
    		  
    #1

    May 28, 2014, 10:30 AM
    Wiring order for a frigidaire door lock
    I don't see them on the switch just on the wires
    superplex69's Avatar
    superplex69 Posts: 2, Reputation: 1
    New Member
    		  
    #2

    May 28, 2014, 10:41 AM
    Wiring order for a frigidaire door lock
    I have a frigidaire dryer I took apart to fix the glides. I did not pay attention to the wiring .any help
    drtom4444's Avatar
    drtom4444 Posts: 3,282, Reputation: 145
    Ultra Member
    		  
    #3

    May 29, 2014, 06:02 AM
    You will have to wire it with a meter. You have a common coming in and with the door open power comes in the common and goes to the light (Normally closed) then with switch depressed it energizes dryer circuit in series with the safeties (normally open contact). It's that simple. I will give you a link to download the manuals here, but use a meter to verify: https://dl.dropboxusercontent.com/u/...e%20Manual.pdf
    https://dl.dropboxusercontent.com/u/...r%20Models.pdf
    https://dl.dropboxusercontent.com/u/...e%20Manual.pdf
    Any time you work on an appliance you should have a meter handy and know how to use it. It's very easy to use a meter and it will answer all questions about what is wrong if used correctly. You will not have to guess; you will know.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kenmore Gas Range Door Lock out, door is open [ 3 Answers ]

Hello, I have a Kenmore Gas Range. My manual has the following model numbers on it: 790-75922, 790-75923, 790-75924, and 790-75929. I was trying to reset an option and pressed the "stop/clear" button and held it for a few seconds. The door locking mechanism started to engage, so I opened the...

Where can I find a front door lock for a two and a half inch thick door? [ 3 Answers ]

Looking for front door lock.

Door lock [ 1 Answers ]

My name is Bill -- just bought '98 Toyota Camry -- drivers' side door lock doesn't work -- other locks do work. Any ideas?

Millikin Door Kit needed in order to install storm door [ 1 Answers ]

Hi. I have a Milliken (may be mis-spelled) exterior door with two side light panels on both sides. I have purchased a Larson Storm Door for the front door. There is not enough depth between the two doors when measuring them - therefore I need to build the front door frame out. I need to know...

View more questions Search