 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
American fridge freezer connection
Plumbing question here: I need to fit an american fridge freezer to cold water supply it has a 22mm female fitting the pipe I need to fit it to is a 15mm male or slip the connection to the dish washer. I cannot seem to find the right fitting please help! Kind regards john
|
||||
|
||||
|
American fridges come with 1/4" O.D. compression fittings which can usually easily be adapted too...
22mm is 0.86" 15mm is 0.59" That suggests that you need to go from 3/4" to 1/2" and any local PLUMBING supply store should have parts readily available for this transition! Mark |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
Surprised! Embarrassed! My wife had accidentally covered the return vent under the bottom left drawer. I didn't catch it until much later. Thanks to any who tried to help. Bruce Hi everyone, Freezer cold. Removed freezer inside back panel. No excess frost on evaporator. Air duct...
Hi everyone, Freezer cold. Removed freezer inside back panel. No excess frost on evaporator. Air duct to fridge seems clear. Circulating fan is running. Fridge thermostat fan is holding baffle wide open. Air exiting duct is at about 33 degrees F. Very little air comes through duct if the...
I have a Maytag fridge with top freezer. The model # is MTB1956DEW. Over the last week, my freezer continuously frosts up with lost of crystal ice on the back and top while at the same time the fridge section below is not staying cold at all. I really like this fridge and really don't want to...
Hi everyone! I have a slightly over a year old Amana bottom-freezer refrigerator (model #: ABR1922FES). Yesterday, I noticed that the fridge wasn't as cold as it should be, so I turned the temp control cooler, and then, as per the owner's manual, waited 24 hours for it to kick in. It didn't....
View more questions Search
|
