Ask Experts Questions for FREE Help !
Ask
    argon66's Avatar
    argon66 Posts: 2, Reputation: 1
    New Member
    		  
    #1

    May 12, 2014, 07:43 AM
    How deep is pump well?
    My well is 160 ft. deep. static is 35 ft. I get 6 gpm with a 187 reserve. How deep is pump well?
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #2

    May 12, 2014, 02:02 PM
    No way to tell. Could be 50 could be 150. By static I assume the water level in the well. What is "187 in reserve"? Gallons in a tank?
    argon66's Avatar
    argon66 Posts: 2, Reputation: 1
    New Member
    		  
    #3

    May 12, 2014, 04:53 PM
    I think the187 reserve means gal. in well casing
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

New Deep Well Pump Not Getting Pressure [ 11 Answers ]

I have just installed a new deep well jet converter pump on my deep well. I primed it as instructed but when I put the gauge back on, there shows no pressure. There is no water in the bladder tank either. I can leave the gauge off and the water will shoot out of the top, making me think the...

Deep well pump [ 1 Answers ]

My pump house is set up for a shallow well I need deep well application and just have a question can I go straight from the pump and then go 90° up over and then down or will I get air in the lines

How deep is my submersible pump? [ 3 Answers ]

I have an electric pump,and I was looking into getting a hand pump for a back-up, but I need to know how deep my submersible is , and also how deep is the water level. I was thinking of dropping some kind of rope or a tape measure with a weight at the end into the well pipe, that way I can measure...

Leak between deep well and reservoir part of deep well [ 2 Answers ]

I have a leak between the deep well submerisble part of the deep well and the reservoir part of the deep well and losing pressure. I have been dealing with this on a daily basis. I have placed numerous calls to a deep well specialist and he says that I don't have a problem, so who do I call because...

In a 160 ft. Deep well with a submersible pump, pressure has gone from 60 to 45 psi [ 5 Answers ]

Water pressure began to degrade about 2 week ago the pump continued to run with pressure switch at 60PSI, reduced pressure switch to 55 ans it was OK, after 1 week pump could not achieve 55PSI. I dropped the pressure to 50PSI. It continues to degrade. Does this sound like a bad pump?

View more questions Search