Ask Experts Questions for FREE Help !
Ask
    roys101's Avatar
    roys101 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    May 7, 2014, 08:16 PM
    Bending emt
    I need to bend a 10' stick of 1/2" rigid into a square, with the two ends meeting on one side of the square. I'm using a 3/4" emt bender. Where do I make my bends? Thanks. Chris.
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #2

    May 7, 2014, 08:42 PM
    Not as simple as you be hoping. http://www.gridalternatives.org/asse...enderGuide.pdf
    Read Kleins rule #2
    stanfortyman's Avatar
    stanfortyman Posts: 5,598, Reputation: 279
    Electrical & Lighting Expert
    		  
    #3

    May 8, 2014, 04:22 AM
    Are you being EMT as the title states, or rigid as your post states?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Minimum distance between emt conduit for data and emt conduit for power [ 1 Answers ]

Minimum distance between emt conduit for data and emt conduit for power?

Metal Wall Bending [ 3 Answers ]

My husband and I installed a 21' above ground pool. The pool is up and filled with water. Near two of the support posts the metal wall is bending. I was in the pool trying to push the coving and wall out but this did not help. We are afraid there is too much stress on the wall or supports and...

Bending Moments [ 1 Answers ]

The bending moment M, along a beam of length L (m), with a uniformly distributed load of w ( kN/m), is given by: M = wLx - wx2 where x is the distance measured 2 2 from one end When L = 8 and w = 4, M = 16x - 2x2...

Side of TV picture bending inward [ 2 Answers ]

I have a Sony Trinitron TV that is 13 years old, I have never had a problem with it but about 2 days ago there is a black frame on the sides that is bending inward . I can still watch TV but since the sides are bent inward it elongates the people, picture and it is very annoying. Any ideas what...

View more questions Search