Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Toilet waste line and flange on an angle??
[ 4 Answers ]
I have a 3 foot deep vertical toilet waste line that is installed through a slab and it comes up on an angle of about 5+ degrees towards the middle of the bath. Now the flange sits on a 5 degree angle to the floor. Anyone have a suggestion as to an easy fix to make the flange sit level on the...
Toilet leaking from supply line only when toilet runs
[ 4 Answers ]
The toilet is completely dry. When it flushes normally, it stays dry. On occasion the toilet will not turn off and continue to run (I've checked each part and cannot find a reason why it would run once in a blue moon but turn off normal 99% of the time). So when it does run and we don't notice, the...
Flange for 3" toilet waste line in basement
[ 11 Answers ]
My basement was already plumbed and ready to be finished when I moved into the home. However, the guys imitating plumbers, not only put the toilet waste line to close to the concrete wall (a problem I have already remedied) they also put a 3" main toilet waste line. Question: Are there flanges...
Length & slope of toilet waste line?
[ 4 Answers ]
I'm going to move the toilet in my bathroom but will be about 6' from the main stack. How long can the horizontal waste line be that goes to the main stack and what slope does it need to be at?
Toilet waste line freeze-up?
[ 1 Answers ]
My toilet has not been giving me any problems before now. Night before last, the temperature got below freezing. When I went to bed in the evening, it flushed fine. The next morning, the line was blocked almost completely. When I would flush the toilet, the bowl would fill with water, then... View more questions Search
|