 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
We have no earthly idea what you have or how big the service should be. Your pool manual is the best source. If you don't have one, Google the manufacturer for info. Suggest you look at your hot water heater for guidance. As a general rule, black iron is run from the gas valve, a drop from a "T" is added with a nipple and cap for a dirt trap and a flare fitting is installed with copper line and shut off from the house gas supply, However, you may have a local code, be sure to check.
|
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
Could anyone show how to draw a riser diagram for this bathroom layout.This is an 8x12 bathroom addition which will have a crawl space below. Thanks in advance for your help. Kamp
2 lines from gas tank to primer and from primer to carb need diagram of lines model tb20cs line trimmer
I am a contractor with a fair amount of knowledge, but have never plumbed a bathroom in a basement. I have a 4" sewer line located in the center of my bathroom layout. The sewer line is at its lowest point in the basement near the house trap. I know I will need a 3" line for the toilet, a 2" line...
Hello my name is Diallo and I am in need of some help with a plumbing riser diagram. Does anyone know where I can find a sample of these sort of plans or some idea what kind of software can provide the help in drawing a plumbing riser diagram?
View more questions Search
|
