Ask Experts Questions for FREE Help !
Ask
    TheGov's Avatar
    TheGov Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Apr 26, 2014, 06:25 PM
    L120 John Deer mower
    I'm having problems with trying to get the transmission reengaging after pulling the lever in the back. I jacked it up and messed with the linkage and it sounds OK but refuse to reengage... Machine is 9 years old and has about 90 hrs on it... I have not pulled the trans cover on it and wonder if it's worth or junk it?
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
    		  
    #2

    May 18, 2014, 04:43 PM
    Hi,
    Do the wheels drive when jacked up? Did you have a rear wheel off and lose the key? Is the belt properly tensioned, in the pulley or intact?
    Peace,
    Clarke
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

John Deer L120 front axle [ 8 Answers ]

We purchased a john deere l120 from home depot in February of 2004... it hasn't been THAT bad of a mower but it has had its problems. Every year I take the time to mow 3.4 acres and I do take pride in my yard and in my mower So the first cut of the season I was mowing and I was just about to...

Replace drive belt john deer l120 [ 1 Answers ]

How do I remove the stering column to replace the drive belt

How do you change the deck belt on a John Deer L120? [ 2 Answers ]

I have got it 90% done but I can't remove the pully at the rear of the deck to get the new belt past the guides. Any suggestion? Tom

John Deer L120 [ 1 Answers ]

I have a John Deer L120 Lawn Tractor and something is blowing the 20amp fuse which in turn shuts down the all power. Looking for ideas?

View more questions Search