Ask Experts Questions for FREE Help !
Ask
    rconine's Avatar
    rconine Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Apr 12, 2014, 05:57 AM
    26 hp twin v intek not getting fuel to one cylinder
    I have a 26 hp intek twin v engine on my Craftsman mower. It was running on one cylinder. I replaced the plug and air filter, checked for spark and did a redneck compression test (blew my finger off the hole when turned over). Is it a fuel problem?

Check out some similar questions!

What oil in18.5 HP Intek Single Cylinder [ 1 Answers ]

What type oil do I use in my Intek 18.5 hp OHV and hiw much

Engine 20 hp intek v twin won't start [ 9 Answers ]

I put new coil is getting gas, and fire. Fire is a orange like fire, will fire off on either, but will not burn the gas in the tank. New gas.

Intek V-twin, pistons don't move [ 0 Answers ]

Hey I have a 26hp inteck vtwin we were mowing the other day n it just quit checked everything n finally took spark plugs out n both pistons r not moving the pulley on bottom of engine is moving so crank is not broke not a clue can anyone help thanks

No fuel problem in Briggs & Stratton 24hp ohv twin cylinder engine [ 0 Answers ]

I have changed fuel filter, pump, plugs... etc... I am getting fuel to the carb, but will not start. I can pour fuel down carb and it will start, but will shut off soon after, the relay on the bottom of the fuel bowl clicks when I turn on the key, what should I try next.

Craftsman mower twin cylinder fuel split [ 1 Answers ]

I have a 1989 917.255919. Twin cylinder. What is the name for the box the separates the fuel into two lines, one for each spark. It's nowhere in the manual. Doesn't seem to be behaving.

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.