Ask Experts Questions for FREE Help !
Ask
    st2468's Avatar
    st2468 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Apr 7, 2014, 11:01 AM
    Electrical wiring
    I have 220v charger for electrical vehicle. It comes with 3 wires and need to connect to plug L14-20, which has 4 connectors. I think green --> G, black --> X, red ---> Y, and nothing --> W. This means W should not connect anything. Is this correct? Please advice.
    stanfortyman's Avatar
    stanfortyman Posts: 5,598, Reputation: 279
    Electrical & Lighting Expert
    		  
    #2

    Apr 7, 2014, 04:55 PM
    If it's 240V why is the plug an L14-20? It should be an L6-20.
    Are you using an existing 120/240V circuit?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Can substandard electrical wiring installation at home produce electrical arching [ 6 Answers ]

Can substandard electrical wiring installation at home produce electrical arching? Then fire?

Electrical Wiring [ 1 Answers ]

I am trying to wire a pull chain switch to a fluoresent light. From the ballast there is a Black, White, on one side and a red wire and a blue wire on same side. On the other side, There are two reds and two blues. How do I connect the pull chain switch?

Electrical wiring [ 12 Answers ]

What gauge of wire to run off a20 amp breaker?

Electrical wiring [ 1 Answers ]

Trying to find out the cubic inches of 2/0 awg thhn wire

Electrical Wiring [ 2 Answers ]

Hello, I am wiring my basement. I am by no means a professional but I generally figure things out and like to adhere to code and inspections. I am running a line of recepticals around a corner. My questing is, Do I have to drill holes in the 2X4's in the corner or can I bring the cable up...

View more questions Search