Ask Experts Questions for FREE Help !
Ask
    nsellmon's Avatar
    nsellmon Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Mar 26, 2014, 09:39 AM
    Inducer Blower issues
    The inducer blower on my goodman furnace will turn on the stop like there's some type of blockage what could be the problem?
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #2

    Mar 26, 2014, 12:52 PM
    Bad bearing that seizes up when hot? Can't imagine an item in the exhaust plenum. They are easy to remove, at least mine is, and then check the plenum and rotation of the fan.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Noise from rotor in Inducer Blower [ 2 Answers ]

We have a ICP GNE100F14A1 furnace and it has started making a rattling noise which becomes a whine at regular speed. On inspection it seems that some blades of the rotor (fan blades) visible from the front are sticking at some point in the rotation. How to fix this?

Bad connections on draft inducer blower [ 0 Answers ]

I have a Bryant Plus 80 furnace. Every once in a while it stops working. If I wiggle the wires under the draft inducer motor, the fan comes on and the furnace works great. I only had to do it this a couple of times last winter but already, as the weather is turning cold, I need to do almost...

I have a Heil and the blower moter comes on but not the inducer [ 0 Answers ]

When you disconnect the flame rollout switch the inducer comes on but no flame. The service indicator light dims on and off. Iam not sure what it's doing.

Draft Inducer motor (Bryant 373LAV hoz) issues [ 3 Answers ]

I trigger the furnace using the TEST lead to the common lead. The inducer motor starts (somewhat slowly), the ignitor glows, missing gas flow rom the GSV and then the blower tuns on and then shuts off. No fault code. I replaced the gas valve, no change. I checked the pressure switch for the draft...

REEM inducer blower problems [ 69 Answers ]

I have a REEM RGRA 07EMAEB fyrnace. The blower motor comes on but doesn't suck enough to close the pressure switch. My exhaust and intakes are free of obstructions have proper termination, proper amount of elbows and my ptrap is working properly and draining. I changed the inducer motor and...

View more questions Search