Ask Experts Questions for FREE Help !
Ask
    Wildwoodcreek's Avatar
    Wildwoodcreek Posts: 3, Reputation: 1
    New Member
    		  
    #1

    Mar 17, 2014, 03:37 PM
    Blower runs all time, red light steady on
    On Bryant model 383kav048091, fan will not shut off, disconnected thermostat, still ran, red indicator light on steady, heater will not come on
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #2

    Mar 17, 2014, 03:48 PM
    The fan running all the time is not a big issue, I actually set all of my stats to run 24/7, its more comfortable and efficient. Check the small switch marked AUTO/ON. In which position is it. The big concern would be if you are not getting any heat all, is that the case?
    Wildwoodcreek's Avatar
    Wildwoodcreek Posts: 3, Reputation: 1
    New Member
    		  
    #3

    Mar 17, 2014, 03:57 PM
    Quote Originally Posted by ballengerb1 View Post
    The fan running all the time is not a big issue, I actually set all of my stats to run 24/7, its more comfortable and efficient. Check the small switch marked AUTO/ON. In which position is it. The big concern would be if you are not getting any heat all, is that the case?
    Yes no heat at all, and fan runs with thermostat disconnected, just started this. No response from unit at all
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #4

    Mar 17, 2014, 04:00 PM
    You will not likely fix this on your own unless you have sugnificant skills and test leads. Call a furnace repair person. I gave called Sears and they will sell you a maintenance deal for less than most repairs and then fix the issue. I suspect your furnace mother is shot.
    Wildwoodcreek's Avatar
    Wildwoodcreek Posts: 3, Reputation: 1
    New Member
    		  
    #5

    Mar 17, 2014, 04:01 PM
    Quote Originally Posted by Wildwoodcreek View Post
    Yes no heat at all, and fan runs with thermostat disconnected, just started this. No response from unit at all
    Fan switch is not on all time only when heat or air is on
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Trane xe80 internal control board failure, red light on steady [ 0 Answers ]

My furnace runs for a while then the flame goes out but the blower keeps running. Control board has solid red light that means internal control board failure (replace)I turn off the power to the unit and then turn back on, it runs for a while then repeats. Seems to get worse the colder it is outside

I have a steady red light on and yellow .This is a Nordyne model C3BH-060C-C [ 1 Answers ]

Whenever the blower kicks in the flame goes out

The red light has a steady blink no hesitation [ 0 Answers ]

This is freongas again, I just wanted to say that the red light in the unit blinks the same no indication of a code. This is for the carrier 58gs100-2 that pilot lights but no fire and on blower is it the PC board?? Heeeeeeelp!!

Goodman furnace won't ignite, burning steady is the little red light. [ 4 Answers ]

Hi, I have a Goodman GMT gas furnace. It is only 4 years old. Two days ago it stopped working. When I checked it out, it seems that the furnace is getting the signal from the thermostat fine, however, the power venter fires up and then right after the gas valve opens, there's a click (which I am...

View more questions Search