Ask Experts Questions for FREE Help !
Ask
    HomeAlone1860's Avatar
    HomeAlone1860 Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Feb 18, 2014, 02:08 AM
    E inductor motor starts but the furnace electronic pilot wouldn't light.
    I have a Heil NTG3100GFA4 furnace and this evening just the inducer motor would start. The pilot (electronic) don't light and start the main burners.

    Problem solved

    After searching all night, I finally found the problem. The rubber hose on to pressure switch had a break in it. I did a temp repair until the stores open.
    parttime's Avatar
    parttime Posts: 1,440, Reputation: 113
    Ultra Member
    		  
    #2

    Feb 18, 2014, 03:08 AM
    Hi HomeAlone and welcome, Do you have a lot of snow where you live? The vent is not blocked is it?


    Well I see you've found the problem since I posted, that's great.
    HomeAlone1860's Avatar
    HomeAlone1860 Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Mar 12, 2014, 09:04 AM
    Clicking sound after the furnace ignites
    After my furnace ignites the burners I here a clicking sound and the burners cut off and then reignite; this happens several times during the heating cycle. I just replaced the inducer motor one week ago and do not recall hearing this before.
    talaniman's Avatar
    talaniman Posts: 54,325, Reputation: 10855
    Expert
    		  
    #4

    Mar 12, 2014, 09:41 AM
    Did you clean the burners?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Igniter on the furnace is not glowing, motor starts and then shuts down. [ 2 Answers ]

Goodman high efficiency furnace. Furnace has been shutting off periodically, for a few hours at a time and then starting up on its own. Sometimes when I would change the temp. it would start up again at the same time. But now... The igniter does not glow when I restart it (after turning...

Payne 394gaw furnace whose pilot ignition sparks forever but the pilot doesn't light. [ 4 Answers ]

I have a Payne 394gaw furnace whose pilot ignition sparks forever but the pilot doesn't light. What do I need to do?

Water Heater Pilot Goes Out When Furnace Starts [ 6 Answers ]

My water heater pilot went out when the furnace started in 2005. Because it also had a leak I replaced the water heater, but to no avail. I could watch the pilot go out, and a candle only inches away did not flicker, so it didn't appear to be draft related. I finally replaced the gas regulator...

Furnace fan turns on but burners don't light - electronic pilot [ 1 Answers ]

Night and Day model 80U-19A Electronic burner lighter does not function

Motor starts but miller furnace will not fire then motor shuts off a off [ 3 Answers ]

Motor starts but miller furnace will not fire then motor shuts off

View more questions Search