Ask Me Help Desk - E inductor motor starts but the furnace electronic pilot wouldn't light.

Ask Me Help Desk (https://www.askmehelpdesk.com/forum.php)

- Heating & Air Conditioning (https://www.askmehelpdesk.com/forumdisplay.php?f=150)

- - E inductor motor starts but the furnace electronic pilot wouldn't light. (https://www.askmehelpdesk.com/showthread.php?t=784775)

E inductor motor starts but the furnace electronic pilot wouldn't light.

I have a Heil NTG3100GFA4 furnace and this evening just the inducer motor would start. The pilot (electronic) don't light and start the main burners.

Problem solved

After searching all night, I finally found the problem. The rubber hose on to pressure switch had a break in it. I did a temp repair until the stores open.

Hi HomeAlone and welcome, Do you have a lot of snow where you live? The vent is not blocked is it?

Well I see you've found the problem since I posted, that's great.

Clicking sound after the furnace ignites

After my furnace ignites the burners I here a clicking sound and the burners cut off and then reignite; this happens several times during the heating cycle. I just replaced the inducer motor one week ago and do not recall hearing this before.

Did you clean the burners?

All times are GMT -7. The time now is 03:18 PM.