Ask Experts Questions for FREE Help !
Ask
    Keithbozarth's Avatar
    Keithbozarth Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Mar 1, 2014, 06:00 AM
    York diamond 80 code 4 red
    The heater works fine but it sounds like it try's to start 3or 4 times we had a power on and off when it was running do to storm I reset heater and it worked fine then the system started doing the same thing and then it works fine some times

Check out some similar questions!

York Diamond 80 - 7 flash error code [ 1 Answers ]

I have a York Diamond 80. Will not light. Have done some research on here, cleaned the flame sensor, still no luck. Failed to ignite and locks out after three tries. What is the next step. What do I check? If anyone can help, great. Thanks

York diamond 80 diagnostic code flashes 4 times [ 0 Answers ]

What started all this is my wife wanted heat. We turned on the thermostat, and the blower would not come on. The diagnostic light was flashing four times. Inside the door for the diagnostic codes it said auxillary/limit switch open. Couldn't find that so I just replaced the control board. Now...

York diamond 80 furnace error code 8 [ 0 Answers ]

York diamond 80 furnace 12 year old White Rogers controller Model 50A50 241 displays error code 8 1. I cleaned flame sensor - no change 2. I replaced flame sensor with new on - controller still displays error code 8 Is it time to replace controller board?

YORK Diamond 90 Furnace code 7 [ 2 Answers ]

YORK Furnace Diamond 90 Model P3URB10N05501D Shows a code 7 What do I do now?

York Diamond Flashing Error Code [ 3 Answers ]

I have a york diamond 8o it haves a white rodgers broad model # 50a50-241 The led ligth flashes 8 times can you tale me what that error code is. Thank you for your help.

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.