 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
York diamond 80 diagnostic code flashes 4 times
What started all this is my wife wanted heat. We turned on the thermostat, and the blower would not come on. The diagnostic light was flashing four times. Inside the door for the diagnostic codes it said auxillary/limit switch open. Couldn't find that so I just replaced the control board. Now I'm getting the same code and it says it could be numerous things, but the one that makes the most sense is the blower motor as when I put my hand on the back of the motor where the wires go in it is hot?
|
||||
Check out some similar questions!
York furnace (GY9S/GM9S/GF9S) Not working - 3 Red flashes on Diagnostic
[ 5 Answers ]
Hi, We have a york furnace up in the attic to heat the bedrooms. We had a major wind condition one day and the furnace stopped working after that. It has the three red-light diagnostic red blinks, which means either the - Faulty pressure switch, broken pressure switch hose, blocked vent...
Led flashes 4 times york diamond 80?
[ 0 Answers ]
York Diamond 80 furnace Model # p3dnb16n06401a No heat - led flashes 4 times, problem start after I replaced 10u270v capacitor (motor was not running)
My furnace fault code light flashes three times the pause and flashes three times aga
[ 3 Answers ]
My furnace fault code light flashes three times the pause and flashes three times again and repeats. What is wrong?
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
