Limit switch new still 4 blinks

dclark6 Posts: 1, Reputation: 1

New Member

Feb 25, 2014, 12:15 PM

Limit switch new still 4 blinks

4 blink code = limit switch replaced limit switch still 4 blinks if I shut the power off for 24 HRS it works about 6HRS then quits

parttime Posts: 1,440, Reputation: 113

Ultra Member

Feb 25, 2014, 02:28 PM

Hi dclark and welcome, What are you working on?

Add your answer here.

Check out some similar questions!

I have a Miller furnace that I have replaced limit switch 626337 and aux switch 62639 [ 0 Answers ]

Blower will not come on when furnace comes up to temp but can turn blower on with switch in fan setting.

Brake/clutch engine start interlock switch (limit switch per Murray) [ 0 Answers ]

I have a 12 yr old,10hp, 30inch cut Murray riding mower which wouldn't start. After eliminating the battery, starter, solenoid and ignition switch as being the problem, I found that the plate that slides backwards to depress the button on the interlock switch is not coming back far enough to...

I am getting 4 blinks on board saying open high limit device. [ 0 Answers ]

I am getting 4 blinks on board saying open high limit device. I am getting continuity through the switches and the fuses so they don't seem to be the problem. Hot surface ignitor seems OK and within resistance range. Flame sensor looks OK but I haven't sanded it yet or tried another one. Not...

Limit switch stays on for a few seconds then blinks back on [ 0 Answers ]

My furnace has been blinking inicating that there is an open limit switch. I shut the main breaker off for a few minutes and then turned it back on, now the light stays on while the fire is lit, once it is on " cooling " mode it starts blinking again, what else can I do?

Goodman limit switch/pressure switch? [ 2 Answers ]

Hi, I've got a goodman furnace (mod. # GHT070-3) it's about 5 years old. Recently, the heat will only kick on for about 30 seconds then shut off. It's giving me 4 flashes: Open limit switch, then it kicks off. After that it gives me 3 flashes and turns back on (pressure switch). It seems the...