Ask Experts Questions for FREE Help !
Ask
    s fegter's Avatar
    s fegter Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Feb 17, 2014, 06:54 PM
    Hiel furance m #nugk100dh08
    Theromsat calls for heat inducer fan come on vacu switch closess pilot lights burners come on and stay on for about 2 to 3 minute, burners go off inducer fan stopes stay off for about 1 to 2 minute then cyle starter any and keeps on doing this. Is the problem the ignition modules witch is part #hq1oo5962ex
    parttime's Avatar
    parttime Posts: 1,440, Reputation: 113
    Ultra Member
    		  
    #2

    Feb 18, 2014, 03:47 AM
    Hi s and welcome, It don't sound like you have an ignition problem, you say the burner is coming on. I'd lean more to a flame sensor. These can be cleaned using steel wool. Good luck
    edward3's Avatar
    edward3 Posts: 12, Reputation: 1
    New Member
    		  
    #3

    Feb 20, 2014, 05:10 PM
    Hi there, May want to also check limit controls, That may be the safety control that is tripping out. Hopefully this will help you out .
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Heil model#NUGK100DH08 GAS VALVE NOT OPENING [ 1 Answers ]

After replacing exhaust blower, I can not get the burner to light. Blower runs but no gas.

Hiel 7000 not heating [ 1 Answers ]

My hiel 7000 will not heat. No flame. Blower works fine. Blower will not shut off when thermostst is set to off position.

Hiel DC90 ultra efficiency furnace burner problem [ 1 Answers ]

I have a Hiel DC90 ultra efficiency furnace. It has been sitting all summer, and I tried starting it up today. So I turned the thermostat on raised the temperature, the furnace starts up I hear the first click, then I hear the second click, then the pilot ignite's, the inside of the burner box...

Where can I find HEIL furnace model NUGK100DH08 wiring diagrams? [ 0 Answers ]

Furnace NUGK100DH08 does't work [ 1 Answers ]

My furnace NUGK100DH08 does't work. Ignition spriks , blower works. But no gas goes throuw . And no flame on the pilot.

View more questions Search