 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Heat pump troubleshooting
The compressor for a 1.5 ton water cooled unit runs @ a high discharged pressure of about 100 then shut off in about 1 minute. The unit has less than the required 18 oz... I drained a bucket of rusted water from the system, opened the valve and run clean water through... Checkd for leak and recharged the system... Compressor is still running @ high then shut off in about a minute...
|
||||
Check out some similar questions!
I have a newly installed ruud 13 seer heat pump, it works fine. It emits a constant hum,louder sometimes than others, this hum continues when machine is off, it will only cease when power is off to machine. I have heard various transformers sound similar,but should this heat pump make this...
My compressor will run for a few seconds then shut off the tech reported the pressure was near 700 lbs and recently he replaced the pressure for this same problem he reported the switch was bad due to contamination in the system blocking the switch fom working he said I either need to replce the...
Low pressure switch shuts down unit. Jumped across low pressure switch so unit will run. High pressure side is 270 psi low pressure side is 0 psi. I believe the unit is low on freon but the HVAC tech says it's a bad expansion valve ( that he replaced 2 years ago ). What do you think. George
The compressor on this heat pump system is running but not cooling while is on cooling stage what's hapenning?
In what sequence should I be testing the electrical components in my heat pump Unit? Can someone plot the electrical path for me?
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
