I have a bryant day and night plus 90i model 398B.

Leslie4846 Posts: 1, Reputation: 1

New Member

Feb 5, 2014, 01:10 PM

I have a bryant day and night plus 90i model 398B.

Code 44. During start up the high blower comes on. When high flame comes on it seems to still be operating in low blower/heat mode

Check out some similar questions!

Day and night bryant [ 1 Answers ]

DAY & NIGHT UNIT #5843660 Installed 1990 on the roof of new construction Last week the heater would not come on. Called the guy that installed it 23 years ago. Upon checking the unit on the roof, he found yellow jackets or mud dobbers has full the pilot orvis. He secured a new part and cam...

Bryant 90i no blower [ 1 Answers ]

Gas lights but blower don't kick on. Error code 15. Help were cold

Bryant plus 90i code 34 [ 9 Answers ]

Bryant plus 90i. A 355 mav I believe. Will not ignite. I get code 34 then code 14. I have read the codes and have tried cleaning the flame sensor, blowing out all the condenser tubes and the green wire ground wire is connected to the chasis. I have taken the flame box cover off and it still didn't...

Bryant Day & Night Plus 90 --Poor Flame [ 6 Answers ]

The symptoms started a few months ago with the Flame roll out switch tripping and setting a code. Upon resetting switch, furnace seemed to work properly for a couple of days. Then gradually over several weeks, the rollout switch needed to be reset hourly. When the burner flame ignites, flame...

Bryant vs. Day and Night AC/Furnace [ 3 Answers ]

I have gotten bids from several companies for a gas furnace and central air. The Bryant and Day and Night dealers are the cheapest, although none of this is cheap. What opinions do you have about these companies? Should I hold out for Trane, Lennox?

View more questions Search

Check out some similar questions!

Add your answer here.