Ask Experts Questions for FREE Help !
Ask
    keith 123's Avatar
    keith 123 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jan 8, 2014, 09:47 AM
    2003 craftman snowblower
    I have a 2003 craftman snowblower,9hp.Ikeep breaking sheer pin on the axel for the drive wheel.I replace the sheer pin and in about 5-10 minutes of operation it breaks again .
    hkstroud's Avatar
    hkstroud Posts: 11,929, Reputation: 899
    Home Improvement & Construction Expert
    		  
    #2

    Jan 8, 2014, 03:39 PM
    Are you using the correct pin? The pin for locking the wheel would not be the same as the shear pin for the auger?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Manual for craftman duramark snowblower DG825 [ 3 Answers ]

I have an 82 craftman Duramark snowblower model DG825. I am looking for the manual in pdf format. I need this manual to find out what the belt number part is for a broken belt. Thanks in advance.

Model number for craftman snowblower? [ 1 Answers ]

I have purchased a used craftman snowblower, but the model plate is missing. I'm guessing it was originally purchased in either '98 or '99. It is a 8.5hp 28" cut. It has 6 speeds forward and 2 reverse. It has the chute directional crank and a lever for adjusting the chute height up on the console....

Craftman snowblower [ 2 Answers ]

I have a 8.5 hp craftman snowblower,could anyone teel me ,how to replace a auger clutch cable,the cable inside the housing? Thanks

Craftman snowblower [ 2 Answers ]

I have a 8.5 hp craftman snowblower would someone please tell me, how to adjust the auger drive clutch cable thank you.

Craftman snowblower [ 6 Answers ]

I have a used snowblower and it works, some what fine. I have noticed it starting to cut out when I start blowing the snow. Now I have changed the belts on the snow blower and that's not the case. Can anyone give me some suggestions on to rectify this problem. It is 10 hp and the cut is?? 27 or...

View more questions Search