Ask Experts Questions for FREE Help !
Ask
    turtlebrook's Avatar
    turtlebrook Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Feb 11, 2008, 03:22 PM
    Craftman snowblower
    I have a 8.5 hp craftman snowblower would someone please tell me, how to adjust the auger drive clutch cable thank you.
    MOWERMAN2468's Avatar
    MOWERMAN2468 Posts: 3,214, Reputation: 243
    Ultra Member
    		  
    #2

    Feb 11, 2008, 05:47 PM
    Either bend the tang that the cable runs through, or adjust at one or both ends of the cable. I of course am guessing on this one as we do not have a need for snowblowers here, sorry.
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #3

    Feb 12, 2008, 11:04 AM
    Are you talikng about the spring cable that engages the auger? There is a screw that clamps the spring shield on the outside of the cable. Lossen the screw and pull out a small amount of shield then reclamp.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Craftman rider [ 4 Answers ]

Stop when I try to engage deck

Craftman snowblower [ 6 Answers ]

I have a used snowblower and it works, some what fine. I have noticed it starting to cut out when I start blowing the snow. Now I have changed the belts on the snow blower and that's not the case. Can anyone give me some suggestions on to rectify this problem. It is 10 hp and the cut is?? 27 or...

I have a craftman eager 4 [ 2 Answers ]

I took the carb. Apart plus the float to see why it was sticking. Now I can't put it back togher and I think I'm missing some part

Craftman 3/8 Drill switch [ 1 Answers ]

I need a wiring diagram for sears 3/8 drill switch Model 31510514, where can I get one?;)

View more questions Search