Ask Experts Questions for FREE Help !
Ask
    larrbryantjr's Avatar
    larrbryantjr Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jan 7, 2014, 12:27 PM
    Kenmore drier will not power up
    My kenmore drier will not power up what do I do?
    parttime's Avatar
    parttime Posts: 1,440, Reputation: 113
    Ultra Member
    		  
    #2

    Jan 7, 2014, 12:42 PM
    First I would check the breaker, turn it completely off and back on. Problem solved? No. Then you check power at the back of the dryer using volt/ohm meter. If that checks out OK, you need to start checking the built in safeties using your meter. Post back what you find.
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #3

    Jan 7, 2014, 12:53 PM
    Should we assume the dryer is 240 vac? Checking power at therecptacle first is a great start. Many dryers have a fusable link which must be replaced once it trips. Model # might help
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kenmore Elete washer 47789 will not power on, get a "ding" when power button is push [ 1 Answers ]

Worked fine last time it was used Kenmore Elete washer 47789 will not power on, get a "ding" when power button is pushed, nothing else.

Kenmore elite drier model 1106301201 parts layout [ 2 Answers ]

Dryer will not heat. Need to have suggested solutions. And a if possible a video on how to replace parts. My email is [email protected]. Thanks

My heat pump has a drier installed from the factory do I need to add another drier [ 3 Answers ]

My heat pump has a drier installed from the factory do I need to add another drier to the liquid line

Kenmore elite drier [ 1 Answers ]

I have a kenmore elite drier and when I push the start button in it starts but as soon as let go it stops. I put duct tape over the button and let the machine go for about 40 minutes, and it didn't even warm up. What do I do?:confused:

View more questions Search