 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
Have a Concord furnace that's 17 yrs old. The induction motor will cycle through but no spark to igniter or any smell of gas? Any ideas? Is there fuses or resets somewhere. This unit is outside it's a RPG12A42D100A-1A condord unit built in 4/96
My furnace will run all day and night but it blows cool air, house won't get above 58? Do I need to clean something? Should I just call a tech and have them do it? Thanks J
I have a Trane XL80 furnace,the igniter is at one end and the flame sensor at the other. When the thermistat asks for heat,the fan kicks in the igniter glows then you here a click an you see the burners go on. My problem is sometimes it doesn't come back on, I watch to see if I can pin point...
T-State is calling, vent fan is running, blower fan is running, have gas and valves open.. . But ignitor doesn't glow.. . Checked voltage to it and have less than 12V.. . What next?
View more questions Search
|
