Ask Experts Questions for FREE Help !
Ask
    Eric captmaalox's Avatar
    Eric captmaalox Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 23, 2013, 10:13 AM
    Continuously clicking from electronic start after pilot lights
    Just replaced ignition box and now the electronic ignition continues to keep initiating longer than usual. What do I need to do next, it will light after thirty seconds or so but I am having a houseful for the holidays and really need some assistance, thanks Eric.
    Grady White's Avatar
    Grady White Posts: 1,417, Reputation: 59
    Ultra Member
    		  
    #2

    Dec 23, 2013, 04:44 PM
    It would seem you have a flame sense problem. I suggest you remove & clean the flame sensor. I generally prefer a scotch bite pad but plain steel wool will work. Make sure the sensor is well into the flame & all the grounds are clean & tight.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

2000 ford ranger continuously clicking [ 2 Answers ]

My 5 speed 2000 ford ranger won't start. When I turn the key I hear a continuous clicking but it will not start. Any idea what the problem is?

2006 jeep wrangler won't start there is no clicking, and no dimming of the lights [ 2 Answers ]

Was driving my jeep earlier today and went out to come home from work and put the key in and all the guages came on tried to start it nothing happened no sounds no dimming of the lights nothing

Heater won't light, can see the pilot on and its clicking. Periodically lights. [ 0 Answers ]

I have a lennox G12 forced air heater. It won't consistently light. The pilot will light and it clicks but it won't always light.

Pilot light lights but Burner won't start. [ 2 Answers ]

I have an Empire DV 215 propane furnace. Last January I turned it off after successfully using for the month of December. Still have 25 gal of propane and wanted to heat area to keep plants warm. Can get pilot light lit but burner won't ignite. Totally cleaned all parts and replaced thermopile...

Gas furnace has an intermittent pilot, pilot lights, furnace tries to start [ 3 Answers ]

Have a 25 plus year old furnace pilot will start when signal sent furnace tries to start makes noise as it tries over and over but will not start. Thanks

View more questions Search