Ask Experts Questions for FREE Help !
Ask
    shirleyjersey's Avatar
    shirleyjersey Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 15, 2013, 04:07 PM
    No hot water after installing aquasource kitchen facucet
    We just installed an aquasource kitchen faucetandhave lots of cold water but no hot water. Hoses are fine. What could be theproblem?
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
    		  
    #2

    Dec 15, 2013, 04:21 PM
    Hoses are fine.
    are you saying that you have hot water to the sprayer , but not to the spout? Before you install the faucet, did you flush the supply lines?
    If not, then shut the water off and remove the cartridge. Check a clean the inlet ports on the cartridge. Reassemble and test. Let me know of that helps. Good luck, Tom
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Re/ Aquasource single handle '09 shower faucet: No Hot water pressure;cold side is OK [ 3 Answers ]

I must need a new pressure valve.. I don't have hot water side pressure, and I checked all other components. Can't find AquaSource faucet company - seems to be only bottled water, not shower fixtures... Anyone with experience in this area please help! Can't find new parts, etc.

Cold water coming out of hot water tap in bathroom but Really hot water in kitchen [ 7 Answers ]

Can anyone give me a reason as to why nearly completely cold water is coming out of my hot water tap in my bathroom but when I run the hot water tap in the kitchen the water is nearly boiling. The hot water and cold water taps are separate in the bathroom, where the kitchen has a handle which...

Aquasource 6558 with very little hot water... [ 0 Answers ]

The above stated model has next to no hot water coming out of the valve from the tub spout or showerhead. I completely took out the anti scald mechinism as to freely turn the valve handle to check if there would be any change in the pressure and there was not. There is a sink next to the shower...

No hot water coming from hot water tap after installing new shower pump [ 4 Answers ]

Hello I installed a new shower pump today. After completing the installation and turning the water back on, there is no water running from any hot water tap in the house. Do you think I have an airlock? Any other possibilities? I have tried to get rid of the airlock with the 'length of hose'...

No water in my kitchen sink after installing new hot water heater [ 2 Answers ]

We installed a new hot water heater and now have VERY LOW water pressure in kitchen sink, just a dribble... water in bath is great... what could be the problem?

View more questions Search