Ask Experts Questions for FREE Help !
Ask
    Z3rws1's Avatar
    Z3rws1 Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Dec 1, 2013, 07:40 PM
    Duet dryer
    I was experiencing an F01 code so I did a complete cleaning of the dryer including a new belt and greasing of the wheels. The sensors all tested out correctly. Now, after the drying cycle has completed, the clothes are still damp and cool to the touch even after running a "more dry" cycle. There are no codes that are coming up. This is after a couple of weeks and over 20 loads. Appears the burner is not cycling on when it should. Any suggestions.
    drtom4444's Avatar
    drtom4444 Posts: 3,282, Reputation: 145
    Ultra Member
    		  
    #2

    Dec 2, 2013, 06:15 AM
    Look at these manuals for a chart and try checking the sensors with an ohm meter because one or more are not reading correctly. If you did not wash out the duct work in the dryer then that is the problem. Merely scraping them out is not enough to clean them out well enough. Look at these: https://dl.dropboxusercontent.com/u/...l%20Dryers.zip
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Whirlpool duet dryer [ 5 Answers ]

We replaced the heater coil, it works for a little while then cuts off. Could it be the thermostat?

Whirlpool duet gas dryer:dryer is off but deam light is on at normal side and touch [ 0 Answers ]

Today morning my whirlpool duet gas dryer doesn't start. After later on it start but lid light ON after dryer is OFF.The light is dim and at the same time my button ERO on normal side. Light is on normal side and touch up side. Both side on dim light and also when start doesn't work pause/cancle...

Whirlpool Duet Dryer [ 2 Answers ]

My Whirlpool Duet Dryer is less than 2 years old. The control panel lights do not come on even though the interior light comes on. The repair man has been here four times to the tune of $ 400.00. He said it was the control panel and it needed to be replaced. That took a week to get parts, but it...

Whirlpool Duet Dryer will not start [ 3 Answers ]

Whirlpool duet Dryer will not turn on. It will show the display on the screen and will even count the timer down but it will not turn on. Someone said that it could possibly be the thermal fuse.... Where is that located? Thanks

Whirlpool duet dryer [ 4 Answers ]

Hi, I have a Whirlpool Duet dryer model #GEW9200LW0 IT WONT START! The controls light up but all it does is beep when I press and hold the start button. I have tried. Made sure the door was closed.. lol;) Unplugging and plugging back in Locking and unlocking the controls Checked the...

View more questions Search