Ask Experts Questions for FREE Help !
Ask
    scrappy 4264's Avatar
    scrappy 4264 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Nov 29, 2013, 04:44 AM
    Kenmore furnace heatexchanger
    Our oil kenmore furnace was checked for the winter and the service man said it had a bad heat exchanger it is 8 yrs old and it is under warranty but we pay for labor do we have to have a sears repairman or could we have some one else do the work and are the parts available
    Grady White's Avatar
    Grady White Posts: 1,417, Reputation: 59
    Ultra Member
    		  
    #2

    Nov 29, 2013, 02:50 PM
    The furnace was likely made by Inter City Products who carries the warranty. Any service person who deals with an ICP distributor should be able to get the heat exchanger for you.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kenmore Furnace [ 1 Answers ]

. Monday - 17-May-'10 - . Furnaces - New Propane Forced Air - "High" Efficiency - Brands - Choosing one: . I have quotes for Kenmore (ICP/Carrier ?), Goodman, Century, & Carrier. . Any suggestions based on RELIABILITY, ease of maintenance, parts availability, performance, etc.? . The...

Kenmore furnace 70 power miser [ 0 Answers ]

The kenmore power miser 70 furnace. The ignitor comes on then turns off with the burners never getting lit, it keeps doing this then the blower motor comes on.

Kenmore 90 Furnace goes into lockout [ 2 Answers ]

My furnace is a Sears Kenmore 90 (Propane) The info on the placard inside the cabinet is: MFG.: HQCD (I believe it to be a TempStar) Model: NULK125DK03867 Mfr. No.:NULK125DK03 The problem: Thermostat calls for heat The ID fan starts and I've inspected the vent and there is air being blown...

Kenmore furnace moisture [ 6 Answers ]

I have a kenmore furnace that will not light because of moisture from the a/c beingg used during the summer. Every year, the first time I need the heat, I have to call a service guy and $100 later, it will work although it seems to take awhile to ignite for the whole season until I use the a/c again

Heatexchanger leaking [ 0 Answers ]

I have a 350,000 BTU sidearm heat exchager connected to a wood fired boiler. I have2" ports on the pool side using sch 80 male adapters. Cannot get them to seal? I use teflon tape and green pipe dope. The heat exchanger has a shallow thread depth I'm sure this has a lot to do with it.

View more questions Search