 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Robertshaw Thermostat problem with night set back
I have 9610 Robertshaw Stat with Day temp set at 70 and night set at 65
There is no problem keeping house okay but at 6AM when the call to change to 70 the Temostat calls for Heat the furance startes blows air but stops like the temp is reach at 65 this will repeat serveral time I use the switch on stat to go from heat to off and back to heat the furance comes on it's own and work's fine to rasies the temp to 70 I don't think the Stat will make this change temp on it's own but has no problem at 12AM droping to 65 |
||||
Check out some similar questions!
Honeywell RTH23B thermostat turns air condition off at set temperature 73 degrees,but never turns back on when temperature gets 74 degrees or higher.
We can not close the upstairs off from the downstairs, the upstairs set at 78 degrees and downstairs at 77 except for 8 hours at night at 75 degrees, we hour ave a fan at the top of staircase running night and day to circulate air and ceiling fans running with one oscillating fan in bedroom. Do...
I am trying to replace my old robertshaw thermostat which an honeywell, the problem is from my wall there is only two cables coming out blue and white, there are two letters too close to a wire and all the videos and manuals how to install it shows four it is confusing . We have heater but no...
I have a honeywell RTH221, I run the schedule wake, sleep and leave. I want my temp set at all around 73 degrees and for some reason dips to 62 degrees in the middle of the night before turning on again, during the day it drops from 73 degree dipping to 67 degree before turning on again! Is that...
Looking to see if someone could help me wire a new robertshaw 9610 thermostat my old round one shorted out and this is the one I was given by the guy who fixes stuff where I work I have 3 wires that come up from the breaker panel and 3 wires that go down to my electric heat in my living room but I...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
