Ask Experts Questions for FREE Help !
Ask
    mikeleanne51203's Avatar
    mikeleanne51203 Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Apr 4, 2007, 05:22 PM
    Installing Trimmer Line
    I don't have the manual for my electric .065 line trimmer. This is my first trimmer and I love it. I ran out of line and need to replace it from scratch. Thank you!
    ljen18's Avatar
    ljen18 Posts: 14, Reputation: 2
    New Member
    		  
    #2

    Apr 6, 2007, 08:52 PM
    Quote Originally Posted by mikeleanne51203
    I don't have the manual for my electric .065 line trimmer. This is my first trimmer and I love it. I ran out of line and need to replace it from scratch. Thank you!
    You need to spin off the nut, the trimmerline spool can be removed. You can now wrap your new line onto the spool. Make sure you wrap the new line in the right direction.Shoul have an arrow on the spool body. Then you feed the end of the line through a hole,insatall the spool,and the nut. You should be good to go now.
    Matt3046's Avatar
    Matt3046 Posts: 831, Reputation: 128
    Senior Member
    		  
    #3

    Apr 6, 2007, 09:00 PM
    What brand is it?
    Is it bump or automatic feed?
    Since power equipment is by nature somewhat dangerous,
    Most of the manufacturers want you to have access to manuals and safety equipment. Often a free copy can be sent to you or can be viewed at the co. web sight. Many of these machines will only function properly with a certain type of line. Also usually the stores will sell a already wound replacement.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

How to rewire and extra line to the main phone line at the demarc [ 1 Answers ]

I cannot afford to pay ATT 99.00 to rewire a non-working phone jack to the demarc. How is this done? The main phone line is working.

Water hammer since installing icemaker line... [ 7 Answers ]

I connected the icemaker to the cold water in the sink area of the kitchen. I changed the single output shutoff valve that was on the cold water, and put a dual output. One side to sink, other to icemaker. I now hear a noticeable "clunk" sound when the upstairs toilet stops filling, and a less...

Broken line trimmer [ 1 Answers ]

How to change the string of a gas trimmer. It's a 725r Ryobi.

Trimmer [ 1 Answers ]

I need to know how to put new string on an echo trimmer

Featherlite Plus Weedeater - Line Trimmer [ 1 Answers ]

My trimmer only works if I hold it so that the fuel is up to the top. It appears that a tube should be in the tank to feed the fuel to the engine when the tank is low. What part or parts will I need to fix this and where can I get them? Thanks!

View more questions Search